ATG400 Ultrasonic Through Coating Thickness Gauge
The model ATG400 is a multi-mode ultrasonic thickness gauge. Based
on the same operating principles as SONAR, the instrument is
capable of measuring the thickness of various materials with
accuracy as high as 0.1/0.01 millimeters.
The multi-mode feature of the gauge allows the user to toggle
between pulse-echo mode (flaw and pit detection), and echo-echo
mode(eliminate paint or coating thickness).
Product Specifications
1) Display:4.5 digits LCD with EL backlight.
2) Range:Pulse-Echo mode: (0.65～600)mm (in Steel).
Echo-Echo mode: (3～30)mm.
3) Sound Velocity Range: (1000~9999) m/s.
4) Resolution: 0.1mm/0.01mm
5) Accuracy: ±(0.5%Thickness+0.01)mm, depends on materials and
conditions
6) Memory for up to 20 files (up to 99 values for each file) of
stored values.
7) Power Source:Two “AA” size, 1.5 Volt alkaline batteries. 100
hours typical operating time (EL backlight off).
8) Communication:USB1.1.
9) Outline dimensions:150mm×74mm×32 mm.
10) Weight:245g
11) Operating Temperature: －20℃～＋60℃;
12) Storage Temperature:-30℃～＋70℃
13) Relative Humidity ≤90％；
Main Functions
1) Multi-mode: Pulse-Echo mode and Echo-Echo mode.
2) Capable of performing measurements on a wide range of material,
including metals, plastic, ceramics, composites, epoxies, glass and
other ultrasonic wave well-conductive materials.
3) Transducer models are available for special application,
including for coarse grain material and high temperature
applications.
4) Probe-Zero function, Sound-Velocity-Calibration function
5) Two-Point Calibration function.
6) Single point mode and Scan mode. Seven measurements readings per
second in single point mode, and sixteen per second in Scan Mode.
7) Coupling status indicator showing the coupling status.
8) Units: Metric/Imperial unit selectable.
9) Battery information indicates the rest capacity of the battery.
10) Auto sleep and auto power off function to conserve battery
life.
11) Optional software to process the memory data on the PC.
Configuration
| No | Item | Qty. | Note |
Standard Configuration | 1 | Main body | 1 |
|
2 | Probe P5EE(5MHz) | 1 |
|
3 | Couplant | 1 |
|
4 | Instrument Case | 1 |
|
5 | Operating Manual | 1 |
|
6 | Packing List | 1 |
|
7 | Guarantee Card | 1 |
|
8 |
|
|
|
Optional Configuration | 9 | Probe P05/90°(5MHz) |
| See Probe Selection Table |
10 | Probe P07(7MHz) |
|
11 | Probe PHT5(5MHz) |
|
12 | DataPro Software | 1 |
|
13 | Communication Cable | 1 |
|
Transducer Selection
Model | Freq MHz | Diam mm | Measuring Range | Lower limit | Description |
P5EE | 5 | 12 | Echo-Echo mode: (3～30)mm for MT180, (3～60)mm for MT190.
| Φ20mm×3.0mm | Trough Coating Measurement |
P05 | 5 | 10 | 1mm～600.0mm(In Steel) | Φ20mm×3.0mm | Normal Measurement |
P05 /90° | 5 | 10 | 1mm～600.0mm(In Steel) | Φ20mm×3.0mm | Normal Measurement |
P07 | 7 | 6 | 0.65mm～200.0mm (In Steel) | Φ15mm×2.0mm | For thin pipe wall or small curvature pipe wall measurement |
PHT5 | 5 | 14 | 1～600mm (In Steel) | 30mm | For high temperature (lower than 300℃) measurement. |
